Light-Duty Turf Protection System
Downloads

EventDeck®

Light-Duty Turf Protection System

EventDeck® is designed for natural and synthetic turf pedestrian areas and where lightweight static equipment will be used. EventDeck is Signature’s most economical rigid flooring option. EventDeck® temporary flooring and pathway system provides access, surface protection, and decorative enhancement for special events and other functions.

Signature’s lightweight indoor/outdoor modular flooring system is designed to provide a rigid, dry, support base for tables, chairs, and other equipment in addition to being used as natural and synthetic turf protection. EventDeck is the perfect alternative to costly built up wooden floors, staging, and decking for special events like festivals. With fast installation and dismantle times, easy cleanup and reuse for many years, Signature’s stadium flooring provides a significant return on investment.

The Ultimate Turf Protection System

Unlock the income-generating potential of your stadium with world-class turf protection matting that allows you to host a wide range of outdoor specialty events. EventDeck is available in two different models, EventDeck 1 and EventDeck 2 for natural and synthetic turf.

EventDeck 1

Aeration holes protect & nurture natural turf
EventDeck 1 (ED1) may be used to protect Bluegrass, Rye, Bermuda Grass, most warm and cold weather grass varieties, and has been used extensively in all climate conditions. Each ED1 module incorporates drainage, air ventilation, a moisture canopy, and bi-lateral cross ribbing for effective weight distribution. From high schools to colleges and professional stadiums, EventDeck is a budget-friendly option that provides superior protection for natural grass fields.

EventDeck 2

Smooth top is ideal for synthetic turf
EventDeck 2 (ED2) is designed specifically for both mono and duo-filament synthetic turf and offers a greater level of protection against debris, liquids and dirt. ED2 may also be used to protect sand and rubber in-fill fields. EventDeck is used on all types of synthetic turf from multiple manufacturers including FieldTurf, Sportexe and Astroturf. ED2 is designed to minimize wear, surface abrasion, surface compaction, and contamination of the turf. Underside channels are contoured to eliminate sharp edges.

Flexible Floor Design

EventDeck temporary flooring system is completely expandable and configurable as required on-site. EventDeck panels connect on all sides using Signature’s easy-to-use connection system.

This interlocking design allows for rapid installation and removal with minimal labor and no equipment. Each specially designed connector T utilizes a unique tubular design that serves as both a connector and a fully functional hinge. Staple or tape carpet and synthetic turf right to EventDeck to create a one-of-kind look for any event.

Innovative Engineered Design for Stadium Events

Each EventDeck temporary flooring module is manufactured in the United States using a high-quality co-polymer plastic material that has a high izod impact value and specific no-break characteristics. High ethylene content provides flexure and prevents cracking. A 5-year UV package is incorporated into the material formulation to prevent brittleness over time as a result of sun exposure. EventDeck modular flooring, is resistant to the rigors of regular use and will not break, crack, fade or become brittle and can be used in all climates and conditions.

Low Maintenance Stadium Flooring System

EventDeck is designed without submerged channels into which debris can be lodged and without any unsightly patterns to catch dirt. Each section has an anti-slip sandblast finish that is low maintenance and easy to clean and maintain using a mop.

Reduce Floor Gaps and Surface Distortion

The slightest variations in temperature causes plastic modular flooring products to expand and contract, creating dangerous gaps and distortion to the surface.

Signature Systems’ patented Expansion Joint Technology is designed to compensate for thermal expansion and allow EventDeck to contract and expand naturally without warping.

Create a Safer More Level Temporary Floor

EventDeck has integrated cable channels to create a safer more level floor. Easily run wires and power cords to center poles, and other in-tent areas under the surface the floor, reducing the trip hazard that wires present while also protecting them from damage.

Smooth Transition Safety Edging

EventDeck edging is available to enhance the look of the floor and for added safety. Simply snap edge pieces on to the end of any flooring section for a finished look, to provide a visible perimeter, and to allow for wheelchairs, rolling carts and equipment to be transported onto and off the floor. Edging is available in standard colors and in safety yellow.

EventDeck Rapidly Deploys in Any Stadium Without Tools

Signature Systems’ proprietary floor design enables EventDeck to be positioned into place using feet only, eliminating the need to bend over or any tools. Pre-assembled sections are compact for easy transport and storage. Once modules are connected, assembled sections roll up for easy installation, storage and transport, allowing for thousands of square feet of event flooring to be installed quickly and easily with minimal labor.

Each individual flooring section is gently curved on the male connector side and correspondingly curved on the female side, such that when a section is butted up against another, it may be nudged into place easily and will self-position. Once positioned, connectors are lined up and ready for snap down connection. This industry leading feature proves invaluable for large installations and saves labor, time and costs.

EventDeck Installation Times

Area (sq/ft),  Time to Install
400, 15 minutes – 1 person
2,400,  1 hour – 2 people
10,000,  3 hours – 4 people
60,000,  8 hours – 14 people

*Note: Times may vary depending on site access and equipment. Use of forklifts and installation cars will increase installation speed.

Module Size: 4″ W x 12″ L x .75″ H (10.16 cm x 30.48 cm x 1.91 cm)Pre-assembled in 3′ x 4′ panels

Material: High-impact polypropylene

Weight: .27 lbs (.12 kg) – 0.81 lbs sq ft (3.95 kg sq/meter)

Weight Load: 8,000 lbs sq/ft (39,059 kilos sq/meter) static load, solid sub-surface

Warranty: 3-year warranty against manufacturer’s defects

National Stock #: 8340-01-525-4069

Maximum Shipping Efficiently
EventDeck comes palletized and partially assembled in sheet form. Sections may then be assembled into large or small rolls, depending on the intended use.

Pallet Size: 40″ x 48″ x 75″ 1,000 sq ft/plt

Truck Quantities:
40′ Truck – 20 pallets, 20,000 sq ft
48′ Truck – 24 pallets, 24,000 sq ft
53′ Truck – 26 Pallets, 26,000 sq ft

Note: Although 1,000 sq ft/plt, are recommended, pallets can be loaded to 1,369 sq ft if required. High cube ocean containers can be loaded with additional product.

Ocean Container Quantities
20′ FC Ocean Container – 12,340 sq ft
40′ HC Ocean Container – 27,380 sq ft

Fire Rating: UL 94HB (Underwriters Laboratory Yellow Card Number) This test signifies that this product does not flare up when exposed to an open flame and has a slow burn rate of 2” per minute for a 2” wide, 0.5 millimeter thickness test sample. EventDeck meets applicable standards for temporary floor covers.ASTM 2859 (Flammability of Finished Texture Floor Covering Materials) – passed test * Testing reports available for fire ratings

Hot Wire Ignition Rating: 3

Melting Point: 324° Fahrenheit / 162° Celsius

Operating Range: -10°F – 150°F / -23.33° C – 65.56°C

Edging Specifications: Edging size is 3” x 12” x ¾” (tapered). Edging is designed to attach to flooring modules both lengthwise and widthwise, providing a gradual tapered edge. Edging extends flat 1” from end of flooring module and then slopes down to ground over 2” span.

Learn how EventDeck can work for you

Get More Information

Consult with an expert via phone or email for advice, recommendations and pricing information. Call 972-684-5736 or submit the email form below:

  • This field is for validation purposes and should be left unchanged.